Everything has an order
Keep it consistent and you will never forget anything, plus, you’ll be doing it right each time!
Donning and doffing sidemount tanks, as I was thought and now how I have perfected it, made me want to share with ALL of you this little secret. OK, it has nothing of a secret because it should be taught at Basic Sidemount class but it is not always and for the self taught, well, here is a way to look better at doing it.
Remember, because we are scuba diving in sidemount, everybody watches us – yes, they do! In fact I would say they envy us 😀
In the idea of trying to keep as close as possible from the DIR concept (comments here are welcome), my configuration, the one I teach, comes with the long hose on the right cylinder and the neck-lace shorter hose (with a 90° fixed elbow) comes to the left cylinder. This latter, is called the primary cylinder, as for us, lucky warm water divers, is the one with the LPI wing/BCD inflator.
If you read this and you are not so lucky and dive cold water in a drysuit, you could have the order reversed. For example those diving a certain brand of sidemount harness (interchangeable dump/inflator) will have the dry suit connection off the left tank and the wing off the right one. Does that change the order of primary to secondary? It depends how you see it really. As far as I would go, my dry bag is NOT a buoyancy device but… Another debate for another interesting article. 🙂
So here we are, it is going to come as a succession of photos with explanation and a little summary. Enjoy 🙂
Thanks to my private model for the photo-shoot 🙂 Thanks Richard 🙂
So here we are now, with our tanks (or cylinder, which ever you prefer!) ON and ready to go sidemount scuba diving. It is done the same way for open water diver and/or for sidemount cave and/or technical divers. The long hose needs to always be on top during the ‘exploration’ part of the dive. Once doing deco dives, the deco cylinder, righ or left, takes the ride over the others but it is a good idea to cross the long hose and pass it over. In case of a TOXIC switch, back gas, is always better than the pure O2!!